Improving the Efficiency and Stability of MAPbI3 Perovskite Solar Cells by Dipeptide Molecules.

Passivating the electronic defects of metal halide perovskite is regarded as an effective way to improve the power conversion efficiency (PCE) of perovskite solar cells (PVSCs). Here, a series of dipeptide molecules with abundant ─C═O, ─O─ and ─NH functional groups as defects passivators for perovskite films are employed. These dipeptide molecules are utilized to treat the surface of prototype methyl ammonium lead iodide (MAPbI3 ) films and the corresponding PVSCs exhibit enhanced photovoltaic performance and ambient stability, which can be ascribed to: 1) the ─C═O and ─O─ can interact with the undercoordinated Pb2+ ions and the ─NH groups can form hydrogen bonds with the I- ions, passivating the defects in perovskite film and reducing charge recombination in PVSCs; 2) the long alkyl chain of dipeptide molecules increases the hydrophobicity of the perovskite surface and thus enhance the stability of PVSCs. The passivated MAPbI3 -based PVSCs exhibit a champion PCE of 20.3% and retain 60% of the initial PCE after 1000 h. It is believed that the defects passivation engineering using polypeptide moleculars can be applied in other perovskite compositions for high device efficiency and stability.

On the Ion Coordination and Crystallization of Metal Halide Perovskites by In Situ Dynamic Optical Probing.

Controlling the crystallization to achieve high-quality homogeneous perovskite film is the key strategy in developing perovskite electronic devices. Here, an in situ dynamic optical probing technique is demonstrated that can monitor the fast crystallization of perovskites and effectively minimize the influence of laser excitation during the measurement. This study finds that the typical static probing technique would damage and induce phase segregation in the perovskite films during the excitation. These issues can be effectively resolved with the dynamic probing approach. It also found that the crystallization between MAPbI3 and MAPbI2 Br is strikingly different. In particular, MAPbI2 Br suffers from inefficient nucleation during the spin-coating that strongly affects the uniform crystal growth in the annealing process. The commonly used pre-heating process is found at a lower temperature not only can further promote the nucleation but also to complete the crystallization of MAPbI2 Br. The role of further annealing at a higher temperature is to facilitate ion-dissociation on the crystal surface to form a passivation layer to stabilize the MAPbI2 Br lattices. The device performance is strongly correlated with the film formation mechanism derived from the in situ results. This work demonstrates that the in situ technique can provide deep insight into the crystallization mechanism, and help to understand the growth mechanism of perovskites with different compositions and dimensionalities.

A new α-amylase inhibitory peptide from Gynura medica extract.

In this study, we discovered a novel peptide, Gymepeptide A, with α-amylase inhibitory activity in the water extract of Gynura medica. The structure of Gymepeptide A was determined as CGDREETR using HR-MS, 1H NMR, 13C NMR, and 2D-NMR techniques. Notably, Gymepeptide A possesses a rare double arginine residue structure and exhibits strong α-amylase inhibitory activity. Enzyme dynamic assays, molecular docking experiments, and isothermal titration calorimetry indicated that the double arginine residue structure of Gymepeptide A interacts with amino acid residues in the nearby active site region of α-amylase through hydrogen bonds and van der Waals forces. This interaction effectively inhibits the hydrolysis activity of α-amylase. Furthermore, in vitro starch digestion tests revealed that Gymepeptide A significantly reduced the digestion rate of starch and the concentration of glucose produced after starch digestion. These findings highlight the great potential of Gymepeptide A in decreasing postprandial blood glucose levels.

Unlocking the Ambient Temperature Effect on FA-Based Perovskites Crystallization by In Situ Optical Method.

Multiple cation-composited perovskites are demonstrated as a promising approach to improving the performance and stability of perovskite solar cells (PSCs). However, recipes developed for fabricating high-performance perovskites in laboratories are always not transferable in large-scale production, as perovskite crystallization is highly sensitive to processing conditions. Here, using an in situ optical method, the ambient temperature effect on the crystallization process in multiple cation-composited perovskites is investigated. It is found that the typical solvent-coordinated intermediate phase in methylammonium lead iodide (MAPbI3 ) is absent in formamidinium lead iodide (FAPbI3 ), and nucleation is almost completed in FAPbI3 right after spin-coating. Interestingly, it is found that there is noticeable nuclei aggregation in Formamidinium (FA)-based perovskites even during the spin-coating process, which is usually only observed during the annealing in MAPbI3 . Such aggregation is further promoted at a higher ambient temperature or in higher FA content. Instead of the general belief of stress release-induced crack formation, it is proposed that the origin of the cracks in FA-based perovskites is due to the aggregation-induced solute depletion effect. This work reveals the limiting factors for achieving high-quality FA-based perovskite films and helps to unlock the existing narrow processing window for future large-scale production.

Deciphering the Roles of MA-Based Volatile Additives for α-FAPbI3 to Enable Efficient Inverted Perovskite Solar Cells.

Functional additives that can interact with the perovskite precursors to form the intermediate phase have been proven essential in obtaining uniform and stable α-FAPbI3 films. Among them, Cl-based volatile additives are the most prevalent in the literature. However, their exact role is still unclear, especially in inverted perovskite solar cells (PSCs). In this work, we have systematically studied the functions of Cl-based volatile additives and MA-based additives in formamidinium lead iodide (FAPbI3)-based inverted PSCs. Using in situ photoluminescence, we provide clear evidence to unravel the different roles of volatile additives (NH4Cl, FACl, and MACl) and MA-based additives (MACl, MABr, and MAI) in the nucleation, crystallization, and phase transition of FAPbI3. Three different kinds of crystallization routes are proposed based on the above additives. The non-MA volatile additives (NH4Cl and FACl) were found to promote crystallization and lower the phase-transition temperatures. The MA-based additives could quickly induce MA-rich nuclei to form pure α-phase FAPbI3 and dramatically reduce phase-transition temperatures. Furthermore, volatile MACl provides a unique effect on promoting the growth of secondary crystallization during annealing. The optimized solar cells with MACl can achieve an efficiency of 23.1%, which is the highest in inverted FAPbI3-based PSCs.

Extracting film thickness and optical constants from spectrophotometric data by evolutionary optimization.

In this paper, we propose a simple and elegant method to extract the thickness and the optical constants of various films from the reflectance and transmittance spectra in the wavelength range of 350 - 1000 nm. The underlying inverse problem is posed here as an optimization problem. To find unique solutions to this problem, we adopt an evolutionary optimization approach that drives a population of candidate solutions towards the global optimum. An ensemble of Tauc-Lorentz Oscillators (TLOs) and an ensemble of Gaussian Oscillators (GOs), are leveraged to compute the reflectance and transmittance spectra for different candidate thickness values and refractive index profiles. This model-based optimization is solved using two efficient evolutionary algorithms (EAs), namely genetic algorithm (GA) and covariance matrix adaptation evolution strategy (CMAES), such that the resulting spectra simultaneously fit all the given data points in the admissible wavelength range. Numerical results validate the effectiveness of the proposed approach in estimating the optical parameters of interest.

Perovskite-based tandem solar cells.

The power conversion efficiency for single-junction solar cells is limited by the Shockley-Quiesser limit. An effective approach to realize high efficiency is to develop multi-junction cells. These years have witnessed the rapid development of organic-inorganic perovskite solar cells. The excellent optoelectronic properties and tunable bandgaps of perovskite materials make them potential candidates for developing tandem solar cells, by combining with silicon, Cu(In,Ga)Se2 and organic solar cells. In this review, we present the recent progress of perovskite-based tandem solar cells, including perovskite/silicon, perovskite/perovskite, perovskite/Cu(In,Ga)Se2, and perovskite/organic cells. Finally, the challenges and opportunities for perovskite-based tandem solar cells are discussed.

Revealing the Degradation and Self-Healing Mechanisms in Perovskite Solar Cells by Sub-Bandgap External Quantum Efficiency Spectroscopy.

Ion dissociation has been identified to determine the intrinsic stability of perovskite solar cells (PVSCs), but the underlying degradation mechanism is still elusive. Herein, by combining highly sensitive sub-bandgap external quantum efficiency (s-EQE) spectroscopy, impedance analysis, and theoretical calculations, the evolution of defect states in PVSCs during the degradation can be monitored. It is found that the degradation of PVSCs can be divided into three steps: 1) dissociation of ions from perovskite lattices, 2) migration of dissociated ions, and 3) consumption of I- by reacting with metal electrode. Importantly, step (3) is found to be crucial as it will accelerate the first two steps and lead to continuous degradation. By replacing the metal with more chemically robust indium tin oxide (ITO), it is found that the dissociated ions under light soaking will only saturate at the perovskite/ITO interface. Importantly, the dissociated ions will subsequently restore to the corresponding vacancies under dark condition to heal the perovskite and photovoltaic performance. Such shuttling of mobile ions without consumption in the ITO-contact PVSCs results in harvesting-rest-recovery cycles in natural day/night operation. It is envisioned that the mechanism of the intrinsic perovskite material degradation reported here will lead to clearer research directions toward highly stable PVSCs.

Mesenchymal stem cell-derived exosomes protect beta cells against hypoxia-induced apoptosis via miR-21 by alleviating ER stress and inhibiting p38 MAPK phosphorylation.

BACKGROUND: Hypoxia is a major cause of beta cell death and dysfunction after transplantation. The aim of this study was to investigate the effect of exosomes derived from mesenchymal stem cells (MSCs) on beta cells under hypoxic conditions and the potential underlying mechanisms. METHODS: Exosomes were isolated from the conditioned medium of human umbilical cord MSCs and identified by WB, NTA, and transmission electron microscopy. Beta cells (ßTC-6) were cultured in serum-free medium in the presence or absence of exosomes under 2% oxygen conditions. Cell viability and apoptosis were analysed with a CCK-8 assay and a flow cytometry-based annexin V-FITC/PI apoptosis detection kit, respectively. Endoplasmic reticulum stress (ER stress) proteins and apoptosis-related proteins were detected by the WB method. MiRNAs contained in MSC exosomes were determined by Illumina HiSeq, and treatment with specific miRNA mimics or inhibitors of the most abundant miRNAs was used to reveal the underlying mechanism of exosomes. RESULTS: Exosomes derived from MSC-conditioned culture medium were 40-100 nm in diameter and expressed the exosome markers CD9, CD63, CD81, HSP70, and Flotillin 1, as well as the MSC markers CD73, CD90, and CD105. Hypoxia significantly induced beta cell apoptosis, while MSC exosomes remarkably improved beta cell survival. The WB results showed that ER stress-related proteins, including GRP78, GRP94, p-eIF2α and CHOP, and the apoptosis-related proteins cleaved caspase 3 and PARP, were upregulated under hypoxic conditions but were inhibited by MSC exosomes. Moreover, the p38 MAPK signalling pathway was activated by hypoxia and was inhibited by MSC exosomes. The Illumina HiSeq results show that MSC exosomes were rich in miR-21, let-7 g, miR-1246, miR-381, and miR-100. After transfection with miRNA mimics, the viability of beta cells under hypoxia was increased significantly by miR-21 mimic, and the p38 MAPK and ER stress-related proteins in beta cells were downregulated. These changes were reversed after exosomes were pretreated with miR-21 inhibitor. CONCLUSIONS: Exosomes derived from MSCs could protect beta cells against apoptosis induced by hypoxia, largely by carrying miR-21, alleviating ER stress and inhibiting p38 MAPK signalling. This result indicated that MSC exosomes might improve encapsulated islet survival and benefit diabetes patients.

LAT, HOXD3 and NFE2L3 identified as novel DNA methylation-driven genes and prognostic markers in human clear cell renal cell carcinoma by integrative bioinformatics approaches.

Background: Abnormal DNA methylation of is one of the important mechanisms leading to tumor pathogenesis. The purpose of this study was to explore differentially methylated genes that may drive the development of renal clear cell carcinoma through a comprehensive analysis of the TCGA database. Materials and methods: Methylation data and RNA-seq data for clear cell renal cell carcinoma were downloaded from The Cancer Genome Atlas (TCGA). Differentially methylated genes and the differential genes associated with survival were then screened by MethylMix R package and univariate Cox proportional-hazards model, respectively. Their common genes were then intersected and obtained for further analysis. Correlation of gene expression and methylation levels, gene set enrichment analysis (GSEA) enrichments, survival curve, and ROC curve plotting for DNA methylation-driven genes were finally performed. The methylation alterations of the three genes were validated via two GEO datasets (GSE70303 and GSE113501), and the genes expression level was verified through two GEO datasets (GSE6344 and GSE53757). Results: Three novel DNA methylation-driven genes LAT, HOXD3 and NFE2L3 were identified in clear cell renal cell carcinoma. Expression analysis further revealed that hypomethylation levels of LAT and NFE2L3 showed higher gene expression levels, while HOXD3 exhibited opposite methylation-expression pattern. The CpG sites of LAT (cg16462073), HOXD3 (cg24000528) and NFE2L3 (cg16882373) that may affect respective gene expressions were also identified. For the survival analysis, we found that hypomethylation and over-expression of LAT and NFE2L3 were correlated with poor survival, while hypermethylation and low-expression HOXD3 was correlated with poor survival of clear cell renal cell carcinoma patients. In addition, GSEA KEGG analysis and biological processes of these genes were also enriched for functional analysis. Kaplan-Meier survival and ROC analyses of these genes showed an average risk score of 0.9140593, AUC = 0.692, which suggested a good clinical application value. Finally, the opposite methylation-expression pattern of these three genes were verified in GEO datasets. Conclusions: In this study, we successfully exhibited the potential DNA methylation-driven genes LAT, HOXD3, and NFE2L3 involved in clear cell renal cell carcinoma. Moreover, gene functions and prognostic risk models were also elucidated, which facilitated the expansion of the current study on the role of methylation in the pathology process of clear cell renal cell carcinoma.

Charge transfer-induced photoluminescence in ZnO nanoparticles.

The quality of solution-processed zinc oxide (ZnO) nanoparticles (NPs) is often correlated with their photoluminescence (PL) spectral characteristics. However, the reported PL spectral characteristics lack consistency and remain controversial. Here we report that "defect-emission free" PL spectra can even be obtained in thin films composed of as-synthesized ZnO NPs. It is found that both the PL spectral line-shape and intensity are extremely sensitive to nitrogen and oxygen. By conducting time-dependent PL (t-PL) and photothermal deflection spectroscopy (PDS) measurements under vacuum and different gases, it is proposed that both inert (N2) and reactive (O2) molecules can be absorbed on the ZnO NP surface and induce charge transfer (CT). The CT states induced by N2 are non-radiative which significantly reduces the band emission. Whereas the CT states induced by O2 are radiative at the visible region, and the exciton transfer is efficient which increases the overall PL quantum yield. Owing to such effects, the previously reported correlation between defects and PL emission becomes questionable and needs to be revisited. Particularly, the visible emission from the ZnO NPs is proved to be facilitated by external effects, instead of direct recombination from defect states.

Porous and Intercrossed PbI2-CsI Nanorod Scaffold for Inverted Planar FA-Cs Mixed-Cation Perovskite Solar Cells.

Depth-dependent growth of perovskite crystals remains challenging for high-performance perovskite solar cells made by a two-step spin-coating method. Effective morphology engineering approaches that enable depth-independent perovskite crystals growth and facile characterization technique to monitor subtle yet influential accompanying changes are urgently required. Here, a porous and intercrossed PbI2-(CsI)0.15 nanorods scaffold is prepared by integrating CsI incorporation with toluene dripping in ambient air, and the underlying mechanism is uncovered. With this porous scaffold and moisture-assisted thermal annealing, depth-independent growth of FA0.85Cs0.15PbI3 is achieved, as evidenced in the photoluminescent (PL) spectra acquired by exciting the perovskite film from the top and bottom individually. It is of broad interest that PL spectroscopy is demonstrated as a sensitive technique to monitor the depth-dependent growth of perovskite. Moreover, the resulting inverted planar FA0.85Cs0.15PbI3 perovskite solar cells deliver an efficiency of 16.85%, along with superior thermal and photostability. By incorporating 2% large-sized diammonium cation, propane-1,3-diammonium, the efficiency is further increased to 17.74%. Our work not only proposes a unique porous PbI2-(CsI)0.15 nanorods scaffold to achieve high-quality perovskite films in a two-step method but also highlights the distinctive advantage of PL spectroscopy in monitoring the depth-dependent quality of perovskite films.

SPEEK Membrane of Ultrahigh Stability Enhanced by Functionalized Carbon Nanotubes for Vanadium Redox Flow Battery.

Proton exchange membrane is the key factor of vanadium redox flow battery (VRB) as their stability largely determine the lifetime of the VRB. In this study, a SPEEK/MWCNTs-OH composite membrane with ultrahigh stability is constructed by blending sulfonated poly(ether ether ketone) (SPEEK) with multi-walled carbon nanotubes toward VRB application. The carbon nanotubes disperse homogeneously in the SPEEK matrix with the assistance of hydroxyl group. The blended membrane exhibits 94.2 and 73.0% capacity retention after 100 and 500 cycles, respectively in a VRB single cell with coulombic efficiency of over 99.4% at 60 mA cm-2 indicating outstanding capability of reducing the permeability of vanadium ions and enhancing the transport of protons. The ultrahigh stability and low cost of the composite membrane make it a competent candidate for the next generation larger-scale vanadium redox flow battery.

Sub-Band Gap Turn-On Near-Infrared-to-Visible Up-Conversion Device Enabled by an Organic-Inorganic Hybrid Perovskite Photovoltaic Absorber.

Direct integration of an infrared (IR) photodetector with an organic light-emitting diode (OLED) enables low-cost, pixel-free IR imaging. However, the operation voltage of the resulting IR-to-visible up-conversion is large because of the series device architecture. Here, we report a low-voltage near-IR (NIR)-to-visible up-conversion device using formamidinium lead iodide as a NIR absorber integrated with a phosphorescent OLED. Because of the efficient photocarrier injection from the hybrid perovskite layer to the OLED, we observed a sub-band gap turn-on of the OLED under NIR illumination. The device showed a NIR-to-visible up-conversion efficiency of 3% and a luminance on/off ratio of 103 at only 5 V. Finally, we demonstrate pixel-free NIR imaging using the up-conversion device.

Evidence on Enhanced Exciton Polarizability in Donor/Acceptor Bulk Heterojunction Organic Photovoltaics.

Using electroabsorption spectroscopy, we explore the polarizability of Frenkel excitons in both pristine donor and D/A blend films. We observe for the first time that the polarizability of excitonic states in pristine donors can be dramatically increased by adding an n-type acceptor. By investigating the dielectric effect in different organic semiconductor systems, we find that the polarizability of Frenkel excitons has direct correlation with the measured dielectric constant of the bulk heterojunction thin films. Our results disclose the difference in the nature of Frenkel excitons in pristine donor and D/A blend systems, revealing an important role of excitonic states in charge separation process of organic photovoltaic devices.